Matrix r7xi-02, Service Manual

Page: 141 / 166

138
10.7 NETPUlSE & AM SETTiNg UP SoP
10.7.1
Matrix fitness 7xi – Setup and Network Connection guide
introduction:
Please note that this guide is meant to provide an overview on the configuration and setup steps that are unique to the 7xi product. The equipment
itself is assembled and installed almost identically to the Matrix Fitness 7xe product line. What sets the Matrix Fitness 7xi equipment apart is our
new ‘app’ interface, personalized logins for each user, social media access, on demand content, and network connectivity. This guide will cover the
initial setup of the 7xi console those aspects of the 7xi product by Matrix Fitness.
7xi Product Workflow
Here is a list of steps that must be completed for all Matrix Fitness / Johnson Fitness 7xi Cardio Installation.
1. Sales order is placed for 7xi product.
2. Johnson Fitness Creates an Asset Management Facility ID for the customer.
3. If Necessary, Johnson Fitness creates a user ID for the customer to access the Asset Management site.
4. An order is placed with Accucode for all necessary components.
a. All 7xi installations require a media Gateway. Depending on Wired v Wireless, the remaining components will vary.
5. A site survey is performed to determine how many Access Points are required to provide adequate wireless coverage in the facility. Access
points are ordered based on the result of this survey.
a. For Wireless setups only.
6. Network access components are installed in the facility and connected to the facility’s internet line.
a. NOTE – It is highly recommended that the customer install a dedicated internet line for 7xi product to allow for necessary bandwidth.
7. New equipment is installed.
8. Consoles are set up to connect to the Access Point.
9. Customer can now view equipment online in the Asset Management website.
a. Note – A workout must be completed before the Equipment will report data to the website. It is recommended that a brief workout is performed
directly after turning on Asset Management.
NOTE: Steps 6-8 can be performed in any order. The order provided is the most streamlined process. All 3 of these steps can be performed at the
time of install.
ordering Components for Wired and Wireless for 7xi
When ordering 7xi equipment, the customer has two options for connecting the equipment to the media gateway: Wired and Wireless. Use the
reference sheet to determine the necessary components for each 7xi order and be sure to include the correct parts when quoting the customer.
Once the sales order is completed, a third party order must be placed with Accucode for the Media Gateway and any additional components
required for the specific install. Orders are placed via http://orders.accucode.com
CHAPTEr 10: BiKE SPECifiCATioNS AND ASSEMBly gUiDE