Matrix r7xi-02, Service Manual

Page: 111 / 166

108
CHAPTEr 9: PArT rEPlACEMENT gUiDE
9.21 rEAr STABiliZEr rEPlACEMENT
1) Remove the 2 screws holding the black cover to the rear stabilizer (Figure A).
2) Remove the black cover (Figure B).
3) Remove the 4 screws holding the rear stabilizer to the frame (Figure C).
4) Remove the rear stabilizer (Figure D).
5) Reverse Steps 1-4 to install a new rear stabilizer. note: When installing a new rear stabilizer, be sure to make sure that the leveling is
stable as outlined in Section 10.4.
figUrE A figUrE B
figUrE C figUrE D