Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 39 / 236

8.3 Camera interfaces
8.3.1 Circular connector male (Power / Digital I/O)
Figure 8: AlysiumTech 12-pin (male; top view), digital I/O, power
Pin. Signal Line in
wxPropView
Digital I/O color
code of power
supply
"MV-DC1201
BLX IO REV2"
Color code of cable
"KS-BLX-PWR"
Pin. on the
mainboard
connection
header
1 GND (for VDC) grey / pink
(bicoloured wire)
blue 2
2 + 12 - 24 VDC red 1
3 DigOut3 Line3 white pink 11
4 Line4 brown grey 7
5 DigOut2 Line2 green yellow 10
6 DigOut0 Line0 yellow green 8
7 DigIn GND grey brown 6
8 RS232 RX pink white 3
9 RS232 TX blue black 4
10 HSD 24 VDC
(24 V supply for the
outputs) red light blue 12
11 Line5 black orange 5
12 DigOut1 Line1 purple violet 9
NC red / blue
(bicoloured wire)
Connector (camera side): AlysiumTech, type 61-W-30-1112 12 pins or equivalent •
Plug (matching cable plug): AlysiumTech, type 61-W-01-1112 12 pins or equivalent •
Plug (matching cable plug for mainboard connection header): Molex 0510211200 •
8.3.1.1 Characteristics of the digital inputs
The digital inputs have inverse-polarity protection. If you are using negative voltage at the positive
input (e.g. sinusoidal signals), you do not have to connect a protective diode in series at the positive
input line.
High level +3 to +24 V
mvBlueLYNX-X Technical Manual
MATRIX VISION GmbH 22 April 2016 Version - 1.49 29