Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 26 / 236

failure of the camera, but a technical fact of a CCD sensor.
5.2.4 Optimizing performance and life time
If the camera is used continuously for long time under high ambient temperature, the inside electrical parts
may deteriorate, resulting in shorter life span. Additional cooling by e.g. air convection is recommended.
5.2.5 Connectors
Confirm the power is off before connecting or disconnecting a signal cable. Handle connectors by the body,
not by the attached wires.
5.2.6 Cleaning
Use a blower or a lens brush to remove dust on the lens or the optical filter.
•
Do not disassemble front flange. •
Clean case with dry soft cloth. Use neutral detergent liquid if needed; wipe the cover with dry cloth. •
Do not use benzene, thinner, alcohol, liquid cleaner or spray-type cleaner. •
If dust or other debris is located between the CCD and optical filter, consult dealer for cleaning by an
optical technician. •
5.3 European Union Declaration of Conformity statement
The mvBlueLYNX-X is in conformity with all applicable essential requirements necessary for
CE
marking. It corresponds to the EU EMC guideline 2014/30/EU based on the following
harmonized standards
Electromagnetic compatibility (EMC)
- Interference emmision EN 61000-6-3 / 2007
- Interference immunity EN 61000-6-2 / 2005
MATRIX VISION corresponds to the EU guideline WEEE 2002/96/EG on waste electrical and
electronic equipment and is registered under WEEE-Reg.-No. DE 25244305.
mvBlueLYNX-X Technical Manual
16 22 April 2016 Version - 1.49 MATRIX VISION GmbH