manualshive.com logo in svg

Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 18 / 236

Share
Download
Matrix Vision mvBlueLYNX-X Technical Manual Download Page 18

2.13  NUnit

The .NET code is tested using the NUnit (http://www.nunit.org/) framework.

2.13.1  NUnit License

Copyright © 2002-2008 Charlie Poole Copyright © 2002-2004 James W. Newkirk, Michael C. Two, Alexei
A. Vorontsov Copyright © 2000-2002 Philip A. Craig

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held
liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and
to alter it and redistribute it freely, subject to the following restrictions:

The origin of this software must not be misrepresented; you must not claim that you wrote the original
software. If you use this software in a product, an acknowledgment (see the following) in the product
documentation is required. Portions Copyright © 2002-2008 Charlie Poole or Copyright © 2002-2004
James W. Newkirk, Michael C. Two, Alexei A. Vorontsov or Copyright © 2000-2002 Philip A. Craig

1. 

Altered source versions must be plainly marked as such, and must not be misrepresented as being the
original software.

2. 

This notice may not be removed or altered from any source distribution.

3. 

mvBlueLYNX-X Technical Manual

8

22 April 2016 Version - 1.49

MATRIX VISION GmbH

Summary of Contents for mvBlueLYNX-X













































































































































































































































Reviews:

No comments