Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 203 / 236

GenICam::AcquisitionControl ac(pDev);
ac.triggerSelector.writeS( "FrameStart" );
ac.triggerMode.writeS( "On" );
ac.triggerSource.writeS( "Line4" );
ac.triggerActivation.writeS( "RisingEdge" );
mvBlueFOX-MLC
// Set Trigger of Slave camera
Device* pCamSlave = getDevicePointerFromSomewhere();
CameraSettingsBlueFOX csS(pCamSlave);
csS.imageRequestTimeout_ms.write( 0 );
csS.triggerMode.write( ctmOnHighLevel );
csS.triggerSource.write( ctsDigIn0 );
Now, the two timers will work like the following figure illustrates, which means
Timer1 is the trigger event and •
Timer2 the trigger pulse width: •
Figure 149: Timers
20.7.4 Programming the synchronized acquisition using wxPropView
The following figures show, how you can set the timers and trigger using the GUI tool wxPropView
Setting of Timer1 (blue box) on the master camera: 1.
mvBlueLYNX-X Technical Manual
MATRIX VISION GmbH 22 April 2016 Version - 1.49 193