Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 115 / 236

mvBlueCOUGAR-XD).
As Default Settings For All Devices Belonging To The Same Family And Product Type: As the
start-up parameters for every device belonging to the same family and product type (e.g.
mvBlueCOUGAR-X).
•
As Default Settings For This Device(Serial Number): As the start-up parameters for this device.
•
To A File: As an XML file that can be used e.g. to transport a setting from one machine to another or
even to use the settings configured for one platform on another (Windows <-> Linux). •
During the startup of a device, all these setting possibilities show different behaviors. The differences are
described in chapter Settings behavior during startup
Restoring of settings previously stored works in a similar way. After a device has been opened the settings
will be loaded automatically as described in Settings behavior during startup.
However, at runtime the user can decide to
explicitly load the device family specific settings stored on this machine (in e.g. wxPropView select
in the Menu Bar: Action -> Capture Settings -> Load -> From The Default Settings Location For
This Devices Family (Per User Only)) •
explicitly load the product specific settings stored on this machine (in e.g. wxPropView select in the
Menu Bar: Action -> Capture Settings -> Load -> From The Default Settings Location For This
Devices Family And Product Type)
•
explicitly load the device specific settings stored on this machine (in e.g. wxPropView select in the
Menu Bar: Action -> Capture Settings -> Load -> From The Default Settings Location For This
Device(Serial Number)) •
explicitly load device family specific settings from a XML file previously created in e.g. wxPropView
select in the Menu Bar: Action -> Capture Settings -> Load -> From A File •
Figure 61: wxPropView - Retoring settings
13.4.1.1.2 Properties
All properties and functions can be displayed in the list control on the lower left side of the dialog. To modify
the value of a property select the edit control right of the properties name. Property values, which refer to the
default value of the device, are displayed in green. A property value once modified by the user will be
displayed in black (even if the value itself has not changed). To restore its default value of a single property
right click on the name of the property and •
select Restore default. •
This will also work if you want to restore the default value for a complete list (which might include sub-lists).
In this case a popup window will be opened and you have to confirm again.
mvBlueLYNX-X Technical Manual
MATRIX VISION GmbH 22 April 2016 Version - 1.49 105