Operating instructions
eHybrid-Greaser
MATO
GmbH & Co. KG
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:+49(0)6108-906-0 / Fax:+49(0)6108-906-120
7
Technical data:
Hydraulic gear pump type
EP 400
Voltage type
Protection class
230V / 50 Hz
IP 55
Motor power
0,75 KW; 5,3 A
Fuse protection supply line
16 A
Max. delivery pressure of hydraulic gear pump
16 bar
High-pressure piston pump Unit size
10-25 kg
50 kg
200 kg
Max. delivery pressure (at unit outlet)
425 bar
Max. delivery rate (at free outlet)
320 ccm/minute
Media temperature (lower temperatures possible,
but subject to the fluidity of the grease)
5°C to +50°C
Noise level
approx. 67 dB(A)
Thread
Grease outlet
R ¼“
Suction tube diameter
40 mm
Suction pipe length
495 mm
690 mm
885 mm
Weight (mobile unit without grease container
40 kg
41,5 kg
--
Pumped media, lubricants:
Greases up to consistency 2 (NLGI / class 2 according to DIN 51818) can be used. Pastes without
lubricating properties (with abrasive emery content) as well as greases or pastes based on silicone oil
and thickened with PTFE must not be processed with this unit.
8
Disposal
After use, the unit must be disposed of in an environmentally friendly manner in
accordance with the applicable legal regulations.
Greasy parts do not belong in the dustbin!
Your contribution to environmental protection:
The applicable regulations for the notification, installation and operation of systems for the
handling of substances hazardous to water must be observed by the operator.
(e.g. WHG, VawS and TRbF).
12
Summary of Contents for eHybrid-Greaser 230V
Page 25: ...25...
