EP 100 / EP 200
EP 300 / EP 400
12
7
Specifications:
Type
EP 100
EP 300
EP 200, EP 400
Voltage type
Protection rating
230V / 50 Hz
IP 55
Engine performance
0.37 KW
0.75 KW
Security of the supply line
10 A
16 A
Max Capacity (SAE 30 free outlet)
ca. 11 l/min
ca. 22 l/min
Suction height
self-priming
up to 2.5m
Max discharge pressure (depending
on oil viscosity)
8 bar
16 bar
Volume level
ca. 67
dB(A)
Dimensions L x W x H
260
x
160
x
185
290
x
190
x
205
290
x
270
x
205
Weight (pump unit without
accessories)
9 kg
12.5 kg
Fluid media EP 100 to EP 400:
Oils based on mineral oil and biodegradable oils.
Fluids including Hazard Class A3 can be supported.
Viscous media of Hazard Classes A1 and A2
cannot
be supported.
If media not listed here is used, please clarify this with our technical department.
If oils (particularly used oils) with high levels of abrasive particles (metal dust, sanding dust, etc.) are
pumped, then a fine filter must be retrofitted in the suction line of the pump.
Not suitable for water, chemicals and corrosive media
8
Disposal
After termination of use the device is to be disposed of in an environmentally
friendly manner in accordance with applicable statutory provisions.
Your contribution to protection of the environment:
The applicable regulations for the registration, installation and operation of equipment for
handling of substances hazardous to water are to be strictly observed by the operator (such as,
e.g., Federal Water Act, German Ordinance on Exposure to Substances Hazardous to Waters
and Technical Rules and Regulations for Flammable Liquids).
