External Encoding
The machine configured with an external encoder is equipped with a specific 12-pin connector, configured in
the following way:
Pin Name Description
1 C8
RFU
2 C4
RFU
3 C7
I/O
4 C3
CLOCK
5 C6
VPP
6 C2
RESET
7 C5
GND
8 C1
VCC=5V
9 CDD_NO
CARD
DETECT
NO
10 CDD_NC
CARD
DETECT
NC
11 Free
1
2
3
4
8
9
10
5
6
7 12
11
Binder
female
socket
12
ways
black
connector
720
series
p/n
99
9136
00
12
12 Free
A sequence of commands must be sent via the printer interface to insert a card into the printer, position it
under the station and establish contact. Sending the command sequence:
A card is moved automatically from the feeder to the encoding station and stops. The contact station is
pushed downward to make contact with the card
The chip can be programmed via the external coupler.
Magnetic Encoding
The magnetic encoder module is installed in factory and printers with this option are proposed with specific
product codes.
The printer with MAG encoder compatible with ISO standards is available and, on request, the MAG printer
that complies with JISII regulations for Japan may be available.
User Guide
6-3
