Encoding Options
Chip Encoding
The Chip Encoder is an optional module for the Espresso products that allows the encoding of chip cards
(smart cards).
Available chip encoding modules and related functionalities:
CHIP ENCODING STATION COMBO OMNIKEY
Allows you to run chip encoding on contact cards (via Chip PCTwin) and on cards with
out contacts (via Chip Omnikey)
Code
PR000015
CHIP ENCODING STATION CONTACT PCTWIN
Allows you to run chip encoding on contactless cards only (via Chip PCTwin)
Code
PR000024
CHIP ENCODING STATION CONTACT OMNIKEY
Allows you to run chip encoding on contact cards only (via Chip Omnikey)
Code
PR000025
CHIP ENCODING STATION CONTACTLESS OMNIKEY
Allows you to run only on chip encoding contactless cards (via Chip Omnikey)
Code
PR000026
CONTACT STATION AND EXTERNAL ENCODER CONNECTION
Allows you to run chip encoding using an encoding system off the printer
Code
PR000020
CONTACT STATION FOR CHIP ENCODING
Allows you to run chip encoding with user-selected.
Encoder boards other than those proposed by Matica
Code
PR000223
Install the module according to the instructions contained in the package.
Encoding Test
Warning:
Before proceeding with the configuration of the module make sure the printer is turned on and
connected to your computer via USB.
Warning:
before proceeding with encoding operations, download the driver compatible with the O.S: used
in the PC from the site of the encoder board manufacturer.
User Guide
6-1
