5)
Close the printing module compartment cover.
a
b
c
e
d
Note
: Keep away from the printhead so as avoid damaging it.
Card Feeding
The input Hopper (automatic card feeder) can hold a maximum of one hundred 0.76 mm thick cards. A label
inside the door gives the instructions for correctly positioning and orienting the card.
When the single card manual feeder option is present, it can be used without needing to empty the input
Hopper.
The card path can be selected via software to speed card processing:
Hopper
Reject bin.
The output tray in the front part of the printer has a capacity of eighty or thirty cards with a thickness of 0.76
mm, according to whether the manual feed option is present for the Moca model.
Input Hopper (Automatic Card Feeder)
1)
Open the Hopper door on the operator panel by pressing at point (a) indicated in the figure below. Load
the cards in the Hopper (b) and then close the door.
a
a
b
c
2-2
User Guide
