Attaching and detaching the CLS 650/850
Page 20
6
Attaching and detaching the CLS 650/850
6.1
Preliminary comments
Danger!
If you do not comply with the following instructions the implement can tip
over when it is being attached or detached:
Ensure that the CLS is standing or parked on a level and solid substrate.
For the version with high-dump always lower the collection bin before
detaching the CLS from the tractor.
Always empty and close the collection bin before detaching the
CLS from the tractor.
Comment!
The manner in which you attach and detach the CLS depends on the hitch
(rear three-point linkage, quick-hitch, basic hitch) that is mounted on your
tractor, and whether you have selected the version of the CLS with or with-
out chassis.
6.2
Attachment with rear three-point linkage
Danger!
The implement can tip over when it is being attached if the following instruc-
tions are not complied with:
Ensure that the CLS is on a level and solid substrate.
Only mount the CLS if the collection bin is empty, closed and lowered.
6.2.1
CLS 650/850 with support wheels
Proceed as follows to attach the CS 650/850 with support wheels to a three-point linkage:
1.
With the tractor in reverse approach the CS and ensure that the rear three-point
linkage is the same height as the CS.
2.
Remove the linch pin on the lower link bolt (see Fig. 25).
Fig. 25: Lower link bolt
Lower link bolt
Linch pin
