First installation
Page 12
9.
Rivet the hose holders to the tractor body and connect the hydraulic lines (see Fig.
9). These hose holders are used as a parking possibility for the hoses when the
hoses are uncoupled from the control valve and the valve is used for other purposes.
Fig. 9: Attaching the hose holders
5.1.2
Mounting the basic hitch on John Deere X Series tractors
Danger!
The operator or persons near the tractor/implement can be severely injured.
Switch off the tractor engine and remove the ignition key before mounting
the basic hitch.
Attention!
The tractor and the CLS can be damaged.
Only use the supplied material.
Note!
The basic hitch is not included in the CLS scope of delivery and must be
ordered separately.
1.
Connect the transverse element to the tractor frame (see Fig. 10).
Fig. 10: Mounting the transverse element
2.
If a driver's cab is mounted, place the supplied spacer plate between transverse
element and the mounting (see Fig. 10).
3.
Mount the lower attachment rest to the tractor frame (see Fig. 11).
Spacer plate
Transverse element
fastening (4 screws)
