MANUFACTURED BY MATelec AUSTRALIA EMAIL: [email protected]
MATelec reserves the right to alter technical specifications without notice
A quick reference to the controller’s
Keypad and Indicator functions and
meanings.
KEYPAD
INDICATORS
PUSH BUTTONS
POWER ON
Power is turned on
ON STEADY
A high level alarm has been
present for the preset time
FLASHING
A low level alarm is present
ON STEADY
A pump fault/overload has
occured
FLASHING
A prime loss fault has occured
The pump is set to Automatic
Pumping Mode
The pump is set to Manual
Pumping Mode
To turn pump off
DISTRIBUTED BY:
8
INSTALLATION DATE:
SERIAL NUMBER:
Dual Pump
Controller
PUMP 1
PUMP 2
AUTO
OFF
AUTO
OFF
MAN
MAN
MUTE/
RESET
PUMP ON
PUMP ON
FAULT
FAULT
LEVEL
ALARM
POWER
ON
DANGER - HIGH VOLTAGE
DO NOT REMOVE COVER. AUTHORIZED PERSONS ONLY
Steady - Overload
Flash - Prime Loss
Steady - Overload
Flash - Prime Loss
Press and hold
for 3 secs to reset
Steady - High Level
Flash - Low Level
MUTE/
RESET
AUTO
OFF
MAN
RUNNING
FAULT
ON STEADY
Pump is switched on to run
MOMENTARY PRESS
To mute audible buzzer
PRESS FOR 3 SECS
To reset alarms and faults
PRESS CONTINUOUS
To test indicator lights, strobe
and siren
POWER
ON
HIGH
LEVEL
