background image

MUC122S 7 12/04/12

MUC122S 12V Screwdriver

MATCO 12V CORDLESS TOOLS

 

Matco Tools warrants its 12V tools to be free from defects in 
material and workmanship for a period of (2) years from the 
original date of purchase with one year of free service . In the 
second year, if inspection shows the trouble is caused by a 
defect in material and/or workmanship, Matco will repair (or 
replace at our option) without charge . Registration is required 
through your local authorized Matco distributor and/or by 
submission of completed registration form included with the 
product . Defective products must be returned and analyzed by 
Tri-County Power Tool, Inc . for the United States or Pneutool 
Parts & Services, Ltd or Diversified Power Inc for Canada, at the 
addresses listed below, freight prepaid .  Any tool that has been 
serviced by the user or by an unauthorized service center will 
subsequently void the warranty of the tool . 
Misuse, abuse or normal wear of a product is not covered under 
warranty .
Defects in material and workmanship do not apply where the 
issues below are present:
•  Repairs were made or attempted by unauthorized service 
center or individual .
•  Repairs are required because of normal wear and tear on 
the tool . Normal wear and tear items to include but not limited 
to carbon brushes, TPR (rubber grip portions) wear, switch 
failure, PCB (internal circuit board wear), socket retaining rings, 
etc . These are examples of some failures that may not be 
covered under defects in material and workmanship but are 
considered normal wear and tear .  
•  The tool has been misused, abused, or not given the 
proper maintenance . (example, Cordless ratchet heads should 
be greased, tool motors should not be exposed to harmful 
substances such as (cleaning chemicals, excessive dust and 
dirt, and metal shavings or debris) 
•   Alterations or improper accessories were used with the 
product .

MATCO 12V LITHIUM-ION   
BATTERY MUC12LB / CHARGER MUC12LC

Matco Tools warrants its 12V Lithium-ion (battery/charger) to 
be free from defects in material and workmanship for a period 
of (2) years from the original date of purchase . Registration is 
required through your local authorized Matco distributor and/
or by submission of completed registration form included 
with the product .  If the battery/charger should fail within the 
warranty period, it must be returned and analyzed by Tri-County 
Power Tool, Inc .,  Pneutool Parts & Services, Ltd . or Diversified 
Power Inc at the addresses listed below, freight prepaid . A 
battery capacity defect  could be defined as the battery no 
longer accepting a charge, or holding a charge for the battery 
manufacturing specified period as determined by Matco Tools 
Repair center . Based on the evaluation, Matco Tools, at their 
discretion, will either repair or replace any batteries to be found 
defective in material or workmanship at no charge .  Please see 
Matco Battery Care Guide in the Cordless Operating Manual for 
any of the Infinium products . You will find helpful tips that may 
maximize the useful life of your battery .  
Address for Returns as follows:
 

  

 

TRI-COUNTY POWER TOOL, INC . 
1300 Brookpark Rd . 
Cleveland, OH 44109
(216) 398-6120
Fax: (216) 398-6121
Toll Free: 1-866-873-8278

PNEUTOOL PARTS AND SERVICE CO . LTD . 
33 Haas Rd .
Toronto, ON M9W 3A1 Canada
(416) 748-2100
(888) 748-1201 Toll Free In Canada

DIVERSIFIED POWER, INC .
90 Buttermill Avenue,
Vaughan, Ontario
L4K 3X7 Canada
Tel: 905-760-9077 
Toll Free: 800-821-7975 

MATCO CORDLESS WARRANTY

 

Summary of Contents for MUC122S














Reviews: