CombiMaster 230V Series
– User and Installation Manual
11
•
For CZone setup, an RJ45-M12 Drop cable CZone/MB (included) and a tee connector (not included).
•
For MasterBus setup, an RJ45 MasterBus cable (not included).
•
DC cables to connect the CombiMaster to the batteries and common negative. See section 4.5.1 for specifications.
•
DC fuse holder with a DC fuse, to be integrated in the positive DC cable.
•
Screws/bolts (Ø 6mm / ¼") with plugs to mount the CombiMaster to a surface. Use mounting materials which are suited to
carry the weight of the CombiMaster.
•
AC cable to connect the AC input to an AC power source. See section 4.5.2 for specifications.
•
Batteries. See section 4.3 for specifications.
•
Appropriate and reliable cable terminals, cable lugs, battery terminals and cord end terminals.
We recommend as a minimum tool kit:
•
Socket wrench to fix the main DC cables (13mm / ½”).
•
Socket wrench to fix the Safety ground connection (10mm / 3/8”).
•
Flat blade screw driver to fix the screw terminals of the AC wiring.
•
Tools to fix the screws / bolts (Ø 6mm / ¼") with plugs to mount the CombiMaster to a surface.
•
Philips screw driver number 2 to open the connection compartment.
4.7
Installation step-by-step
Step 1.
Turn off the electrical power.
Step 2.
On a solid surface, mark the holes for the mounting bracket and secure the mounting bracket to the surface.
Wall mounted
Tabletop mounted
Step 3.
Place the CombiMaster over the mounting bracket and then downwards until it snaps into place.
Step 4.
Fix the CombiMaster to the surface by fastening two screws at the lower side of the case as well.