ChargeMaster Plus 12/75-3, 12/100-3, 24/40-3, 24/60-3 – User and Installation Manual
15
4.2.4 Li-ion Battery MLI Ultra
The ChargeMaster Plus can be used with a Li-ion battery
MLI Ultra. Refer to the manual of the Li-ion battery MLI
Ultra for information on how to configure your system.
WARNING!
Before using the Li-ion battery, it must be
properly installed and commissioned!
4.2.5 Monitoring
Value
Meaning
Default
Value range
General
Device state
Shows charger state (Charging / Stand-by / Alarm)
(read only)
Charger state
Actual state of charge process:
Off/bulk/absorption/float/suspended
(read only)
Charger
Function to toggle the charger state
On / Stand-by
Input current
Option to set the maximum AC input current level to prevent
a generator or shore fuse from overload
20
0-20A
Battery temp.
Actual temperature of the main battery bank (in °C)
(read only)
Output 1
Output 1
Output state (Off/pre-float/on)
(read only)
Output 1
Voltage of charge output 1
(read only)
Output 1
Output current of charge output 1
(read only)
Shunt device
A connected MasterShunt can be chosen for feedback on
the charged battery.
Not connected
(read only)
Output 2
Output 2
Output state (Off/pre-float/on)
(read only)
Output 2
Voltage of charge output 2
(read only)
Output 2
Output current of charge output 2
(read only)
Smart Terminal
Output 3
Output state (Off/pre-float/on/smart terminal)
(read only)
Output 3
Voltage of charge output 3
(read only)
Output 3
Output current of charge output 3
(read only)
4.2.6 Alarm
Value
Meaning
Value range
Alarm status
Bat. temp. high
Battery temperature too high
(read only)
TS error
Temperature sensor error
(read only)
AC error
AC input (mains) error
(read only)
Output 1
Battery high
DC output voltage is too high
(read only)
Battery low
DC output voltage is too low
(read only)
Shunt mismatch
(read only)
Reverse polarity
DC + and DC –are connected in reverse (this will damage the charger)
(read only)
Output 2
Battery high
DC output voltage is too high
(read only)
Battery low
DC output voltage is too low
(read only)
Reverse polarity
DC + and DC –are connected in reverse (this will damage the charger)
(read only)
Smart terminal
Battery high
DC output voltage is too high
(read only)
Battery low
DC output voltage is too low
(read only)
Reverse polarity
DC + and DC –are connected in reverse (this will damage the charger)
(read only)