20
model no. 054-0339-8 | contact us 1-800-689-9928
INSTALLING & CLEANING CARTRIDGE FILTER
INSTALLING CARTRIDGE FILTER
REMOVING & CLEANING CARTRIDGE FILTER
Verify that the power cord is disconnected from
the outlet.
Unlock and remove the filter retainer by turning
the retainer handle counter-clockwise.
Install cleaned or new filters as above in steps 2-3 of Installing Cartridge Filter.
Wet filters should be removed and allowed to air dry for 24 hours before installing onto the filter cage.
Place the filter retainer on the top of the
cartridge filter over the raised lip and tighten
down by turning the retainer clockwise; do not
over-tighten. Place the power head back onto
the collection tank.
Remove the power head and place in an upside
down position. Install the cartridge filter over the
filter cage making sure the cage is completely
covered.
With the removed power head in an upside
down position, carefully remove the cartridge
filter from the filter cage.
Clean the cartridge filter by gently tapping or
brushing dirt off. Cleaning should not be done
indoors in living areas. For optimal performance
a new filter is recommended.
1
1
4
5
3
2
2
3
