11
Insert the handle into the slots located on the top
of the power head and secure it with the screws
provided. Do not over-tighten the screws.
For wet vacuum cleaning, remove the cartridge
filter and install the supplied foam wet filter.
See page 21 for the foam wet filter installation
instructions.
Insert the larger end of the hose into the vacuum
port on the power head.
Your vacuum comes ready for dry vacuum
cleaning. If the cartridge filter is not installed,
refer to page 20 for installation instructions.
Place the power head back on the collection
tank aligning the top section with the latches,
and snap into place.
Choose the desired attachment and insert onto
the end of the hose or extension wand.
GENERAL ASSEMBLY INSTRUCTIONS
6
8
10
7
9
11
