15
WET VACUUM OPERATION
Turn the motor on by flipping the switch to the ‘I’
ON position.
Once you have completed vacuuming, flip the
switch to the 'O' OFF position and unplug the
power cord from the outlet. After use, empty
the collection tank, clean and dry the inside and
outside of the collection tank.
5
6
REMEMBER!
The foam wet filter must be removed after wet vacuuming and
the cartridge filter must be installed before dry vacuuming again.
IMPORTANT:
When vacuuming large quantities of liquids, do not immerse the nozzle
completely in the liquid; leave a gap at the tip of the nozzle opening to allow
air inflow. The machine is fitted with a float valve that stops the suction action
when the collection tank reaches its maximum capacity. You will notice an
increase in motor speed. When this happens, turn off the machine, disconnect
from power supply, and drain the liquid into a suitable receptacle or drain.
To continue vacuuming, refit the power head to the collection tank. After wet
vacuuming, turn the machine off and remove plug from power supply. Empty
the collection tank, clean and dry the inside and outside before storage.
