– 1 –
TABLE OF CONTENTS
General Safety Instructions . . . . . . . .1-3
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical Requirements . . . . . . . . . . . .3-4
Extension Cords . . . . . . . . . . . . . . . . . . . . 4
California Proposition 65 . . . . . . . . . . . . 4
Description . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly . . . . . . . . . . . . . . . . . . . . . . . .5-7
Functional Description
and Operation . . . . . . . . . . . . . . . . . . . .7-9
Maintenance . . . . . . . . . . . . . . . . . . . .9-10
Troubleshooting . . . . . . . . . . . . . . . . .10-11
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . 12
Exploded Parts . . . . . . . . . . . . . . . . . . . . 13
GENERAL SAFETY
INSTRUCTIONS
READ THIS OWNER'S
MANUAL COMPLETELY AND MAkE
SURE YOU UNDERSTAND ALL OF IT'S
SAFETY GUIDELINES.
1 .
Keep guards in place
and in
working order .
2 .
remove adjusting Keys and
wrenches.
Before turning on the tile
saw, make sure the keys and adjusting
wrenches have been removed .
3 .
Keep worK area clean.
Cluttered areas
and benches invite accidents .
4 .
always remain alert when the saw
is in use.
Inattention on the part of the
operator may lead to serious injury .
5 .
don’t use in a dangerous
environment
. Don’t use power tools in
damp or wet locations or expose them to
rain . Keep work area well lit .
6 .
Keep children away.
All visitors should
remain at a safe distance from work area .
7 .
maKe worKshop child-proof
with
padlocks, master switches or by removing
starter keys .
8 .
use the right tool.
Don’t force a tool
or attachment to do a job for which it was
not designed .
9 .
use the proper eXtension cord.
Make sure your extension cord is in good
condition . When using an extension cord,
be sure to use one heavy enough to carry
the current your product will draw . An
undersized cord will cause a drop in line
voltage resulting in loss of power and
overheating . TABLE 1 (page 4) shows the
correct size to use depending on cord
length and nameplate ampere rating . If
in doubt, use the next heavier gauge . The
smaller the gauge number, the heavier
the cord .
10 .
don’t force the tool.
It has been
designed to operate at maximum safety and
performance levels .
11 .
do not force the material being cut.
Always let the blade cut at its own speed .
12 .
wear proper apparel.
Do not wear
loose clothing, neckties, rings, bracelets
or other jewelry which may get caught
in moving parts . Non-slip foot wear is
recommended . Wear protective hair
covering if you have long hair .
13 .
always use safety glasses.
Also use
face or dust mask for commercial cutting
operations . Everyday eyeglasses only have
impact-resistant lenses, they are NOT
safety glasses .
14 .
don’t overreach.
Keep proper footing
and balance at all times .
15 .
maintain tools with care.
Keep tools
clean and in good working condition for
maximum safety performance .
16 .
disconnect saw before servicing
– when changing accessories, such as
blades, bits, cutters, etc .
17 .
reduce the risK of unintentional
starting.
Make sure switch is in OFF
position before plugging in .
18 .
use recommended accessories.
Consult the owner’s manual for
recommended accessories . The use of
improper accessories may increase risk
of injury .
English
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1
FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL
BEFORE OPERATING SAW.
1 . Always wear safety goggles when cutting .
2 . Use blade guard for every operation for which it can be used .
3 . Disconnect saw before cleaning or changing blade .
4 . Do not use any cutting blade with openings and grooves . Use only continuous rim blades .
5 . Replace damaged blade before operating .
6 . Do not expose to rain or use in damp locations .
Limited Warranty
— Refer to warranty card .
Español
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .página 23
LEE ESTA INSTUCCION MANUAL ANTES
DE USA LA SIERRA PARA TU BIEN.
1 . Siempre utilice gafas de protección al cortar .
2 . Utilice una capota de protección para cada operación en la cual la puede utilizar .
3 . Desconectar la sierra antes de limpiarla o antes de cambiar el disco de corte .
4 . No utilice ningún disco de corte que tenga aperturas o ranuras . Solamente utilice discos de
corte lisos .
5 . Reemplace el disco de corte cuando esté dañado .
6 . No la exponga a la lluvia o no la utilice en áreas húmedas .
Garantia Limitada
— Referirse a la tarjeta de guarantia .
Servicio al cliente: 1-866-435-8665
Customer Service: 1-866-435-8665
8" BRIDGE SAW
OWNER’S MANUAL