SAFETY GUIDELINES
8
MIG 140 INVERTER WELDER 058-9305-6
•
Risk of electromagnetic fields: Electromagnetic field can damage electrical
and electronic devices like pacemakers
and hearing aids. Make sure people
using pacemakers are away from your welding area when welding. Always
wrap the MIG gun and ground cable together.
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
Do not allow unskilled or untrained individuals to install and operate this
welder.
•
Before operating the welder, check the insulation of the ground cable, power
cord, and welding cable for damage. Replace or repair the damaged
components before using the welder. Use only recommended parts for
replacement.
•
Keep hands and fingers away from moving parts such as drive roll or fan
while the welder is in use.
•
Avoid contacting or touching welding wire, work piece, ground connection or
electrode from another welder.
•
Do not drape cables over or around the body.
•
Do not point MIG gun toward yourself or other personnel.
•
Consult a doctor before using the electric arc welder.
•
Always have a secure stance while welding to prevent accident.
•
Do not use this welder when you are tired or under influence of alcohol or
drugs.
•
Connect the ground lead close to the work area to ensure proper ground
connection.
•
Always secure the high pressure cylinder upright to a cart or stationary
object.
•
Do not use a welder to thaw frozen pipes.
•
Do not look into the valve of the high pressure cylinder when opening it.
