MasterCraft CSX 220 2008 Owner'S Manual Download Page 39

Page: 39 / 77

Fuel Stabilizer Recommendations

for Ethanol Blend Fuel

The use of a commercially available fuel stabilizer, such

as STAL-BIL®, is recommended when storing ethanol-

blended fuel for more than two (2) weeks.

Volkswagen Diesel-Powered

Engines

See the fuel restrictions and information provided in the

Volkswagen engine manual.

General Information

The following Dangers and Cautions apply to ALL en

gines and fueling systems, regardless of manufacturer:

Fuels that are blended to contain methanol or

wood alcohol should not be used. These fuels can

corrode metal parts in the fuel system and engine.

Fuels that contain methanol will damage the en-

gine. Damage caused by the use of unapproved fu-

els is not covered by warranty.

Extended storage with fuel in the system can affect

the fuel’s stability and may require system inspec-

tion and fuel filter replacement when the unit is

placed back into service.

Damage to the engine by use of low-quality gasoline

or gasoline with an octane rating below the mini-

mum level listed will void the warranty on the boat.

Gasoline is extremely flammable and highly ex-

plosive under certain conditions. Always stop the

engine and never smoke or allow open flames or

sparks within fifty (50) feet of the fueling area

when fueling.

Take care not to spill gasoline. If gasoline is spilled

accidentally, wipe up all traces of it with dry rags

immediately and dispose of properly on shore.

Allowing the fuel level in the fuel tank to fall be-

low one-quarter of a tank full may affect the reli-

ability of the fuel pump or result in damage to the

fuel pump, which is not covered under warranty.

2008 MasterCraft Owners Manual Page 6-3

Summary of Contents for CSX 220 2008














































































Search results

Summary of Contents for CSX 220 2008

Reviews:

Brands by name

Popular brands

MasterCraft CSX 220 2008, Owner'S Manual

Search results

Summary of Contents for CSX 220 2008

Reviews:

Brands by name

Popular brands