MasterCraft CSX 220 2008 Owner'S Manual Download Page 26

Page: 26 / 77

Selecting the

TRIM

tab goes to one of the screens illus-

trated below. These screens display the position of the

installed single-trim tab or dual-trim tabs.

Menu Display Screen

Selecting the

MAIN

tab goes to the screen illustrated in

the next column. Any information available to the instru-

mentation system may be selected by the driver to be

displayed in this screen. This screen is organized into

four (4) quadrants with the user-selected information

digitally displayed in each quadrant.

Menu Display Screen

To change the information displayed simply:

• Press the

DOWN

arrows to highlight the quad-

rant that you wish to change

• Press

SELECT

to access the pull down menu

• Using the

DOWN

arrows highlight the desired

information.

• Press

SELECT

again to store the change

MasterCraft boats equipped with the video display gauge

feature integrated Perfect Pass Wakeboard Pro speed

control software.

The Perfect Pass application can be entered by selecting

the

CRUISE

tab on the

MENU

screen or pressing the re-

mote Perfect Pass button.

Perfect Pass is turned on and

off by pressing the remote perfect pass button.

Please

refer to the Perfect Pass manual for detailed operating in-

structions.

2008 MasterCraft Owners Manual Page 5-3

Summary of Contents for CSX 220 2008














































































Search results

Summary of Contents for CSX 220 2008

Reviews:

Related manuals for CSX 220 2008

Brands by name

Popular brands

MasterCraft CSX 220 2008, Owner'S Manual

Search results

Summary of Contents for CSX 220 2008

Reviews:

Related manuals for CSX 220 2008

Brands by name

Popular brands