Engine Hatch Switch
Where equipped, an engine
hatch cover switch allows
the cover to open and close
electronically. The two-po-
sition switch is pressed up
for ON and down for OFF.
AM/FM Stereo, CD Player,
Remote Control, iPod and MP3
Player Connections
Boats may be equipped
with a range of entertain-
ment opportunities from
radios and CD players to
connections for personal
devices. Most radio and
CD players will be located
within the glovebox of the
boat, but may also be in the console. Remotes may be in
the armrest or on the transom.
The iPod interface option features a cable located inside
the glovebox that allows the unit to simply be plugged
in and run off the boat’s electrical system. An optional
plug-in location for MP3 players is available. Be aware
that all such devices are a drain on the boat’s battery and
electrical system. Care should be taken to avoid exces-
sive usage of such devices and by responding to any
alarms that sound so that the boat’s battery(ies) does not
become fully discharged.
Another option is a wireless stereo remote that will float
if accidentally dropped overboard. The remote can also
double as a key fob for a limited number of keys.
The stereo and components come with a separate manu-
al explaining operation of the devices. Please review and
become familiar with the equipment.
Shower and/or Slick Boot Switch
A single three-position
switch mounted in an aft po-
sition storage area controls
the optional shower and
optional Slick Boot func-
tions. The switch is marked
for each. Turn the switch to-
ward the Shower marking to
turn ON the shower. Return to center for OFF. Turn to the
other direction to turn ON the Slick Boot. Return to cen-
ter for OFF. These instructions work whether the boat is
equipped with one (1) or both of the options, but will not be
found in boats that are not equipped with either option.
Attitude Adjustment
or Trim Tab Switch
MasterCraft utilizes Lenco
attitude adjustment plate
kits on several models.
Dual plate kits are avail-
able on the MariStar 280,
X-80 and 280 STS models;
a single plate kit is used on
the MariStar 245 and X-45,
as well as the MariStar 230
and X-30 (2006 models).
On the dual attitude adjustment plate system, the plates
operate independently of each other to provide optimal
performance by redirecting water flow near the transom
of the boat. These plates have been designed to improve
the overall attitude of a boat. If used properly, the plates
will improve the ride, reduce drag, increase speed and
improve the ride and fuel efficiency of the boat.
The operation of the attitude adjustment plates is basic. The
plane or planes will be mounted with the actuator(s) on the
transom of the boat. When the plate(s) is/are lowered, the
water flow is redirected, creating an upward force at the
stern of the boat. When the stern rises, the bow will lower.
Since these actuators are electromechanical, they pro-
vide an immediate response at the touch of the switch.
The switch is based on the position of the bow. On the
dual attitude adjustment plate system, the left side of the
switch controls the starboard plate and the right side of
2008 MasterCraft Owners Manual Page 5-10
