13
INSTALLING A BATTERY IN THE
JIGSAW
1. Remove the discharged battery (1)
from the tool by pressing on one the
battery release buttons (2) on the
sides of the handle (Fig. 1).
NOTE:
There is one battery release button
on each side of the handle. It is only
necessary to press one of the buttons to
release the battery.
2. Pull the battery out of the tool handle
(3).
3.
Slide the fully charged battery into the
matching cavity in the tool handle
where the discharged battery has
been removed.
NOTE:
Make sure the battery is fully
engaged with the mounting slots in the tool
handle. The battery release buttons will
“click” into place when the battery is fully
installed
.
WARNING:
Do not immerse the
battery pack in water. Sudden cooling
could cause the hot battery to explode or
leak.
INSTALLING A BLADE
WARNING:
Always remove the
battery before installing or removing a
blade or adjusting the jigsaw in any
way.
1. To install a blade in the jigsaw,
remove the chip guard by carefully
pulling outward on the chip guard
mounting points (1) on each side of
the jigsaw (Fig. 2).
ASSEMBLY AND OPERATING
Fig. 1
!
!
Fig. 2
Summary of Contents for 54-8110-2
Page 12: ...12 CONTENTS...
Page 23: ...23 EXPLODED VIEW...
