headline bars
55
headline bars
Engine is running
but no AC output.
Poor cord connection
Check all connections.
Circuit breaker is open.
Reset circuit breaker.
Faulty brush assembly
Replace brush assembly (Service
Centre).
Faulty AVR (auto voltage
regulator)
Replace AVR (Service Centre).
Loose wiring
Inspect and tighten wiring connections.
Other
Contact the help line.
Engine hunts or
falters.
Engine governor defective
Contact the help line.
Dirty fuel valve
Clean the fuel valve.
Carburetor is dirty and running
lean.
Contact the help line.
Choke in wrong position
Move choke until it stops under RUN
position or push in completely.
Repeated circuit
breaker tripping.
Overload
Review load and adjust. See “Do not
Overload Generator” (page 29).
Faulty power cords or device
Check for damaged, bare or frayed
wires. Replace defective device.
Circuit breaker still too hot
Let unit sit for 5 mins.
TROUBLESHOO
TING
