headline bars
19
headline bars
ASSEMBLY
Your generator requires some assembly. This unit ships from our factory without oil in the engine. It
must be properly serviced with fuel and oil before operation.
If you have any questions regarding the assembly of your generator, call our
Technical Support Team at 1-800-689-9928. Please have your serial number and model number
available.
UNPACKING
INSTALL THE WHEEL KIT
INSTALL THE SUPPORT LEG
ASSEMBL
Y
Before adding fuel and oil, tip the
generator onto its recoil end.
Slide the roll pin (B) through the wheel
(A) from the outside.
Slide the roll pin through the mount
point on the frame.
Secure with the R-clip (C).
Repeat to attach the second wheel.
Attach the support leg (D) to the
generator frame with flange bolts (E)
and flange lock nuts (F).
Slowly tip the generator back down so
that it rests on the wheels and support
leg.
1
1
1
2
3
2
2
3
4
5
Set the shipping carton on a solid, flat surface.
Remove everything from the carton except the generator.
Carefully cut each corner of the box from top to bottom. Fold each side flat to the ground to
provide a surface area to work with the generator.
B
F
E
D
C
A
