20
DRIVING SCREWS
When driving screws, care must be taken
to use a bit that correctly fits the head of
the screw being driven. Be sure to use the
largest bit size that will properly fit into the
head of the screw. The bit must also be in
good condition and not worn so it will drive
screws without slipping out of the screw
head.
Always hold the impact driver with two
hands when driving and removing screws
to provide the best possible control over
the tool.
1. Select the correct screwdriver bit for
the screw being driven.
2. Insert the bit into the hex drive
(Fig. 6).
3. Set the forward/reverse button to the
LEFT for driving screws (Fig. 7).
4. Insert the screwdriver bit (1) fully into
the screw head (2) (Fig. 11).
5. While holding the screwdriver firmly
against the screw with both hands and
the bit aligned with the screw,
squeeze the trigger switch and drive
the screw.
6. When the screw is driven to the
correct depth, release the switch and
the impact driver will stop.
ASSEMBLY AND OPERATION
Fig. 11