17
FORWARD/REVERSE SWITCH
This impact driver is equipped with a
forward/reverse button (1) (Fig. 7).
1. To operate the impact driver in the
forward direction, press the
forward/reverse button to the LEFT for
driving screws or tightening nuts.
2. To operate the impact driver in the
reverse direction, press the
forward/reverse button to the RIGHT
for removing screws or removing nuts.
NOTE:
Never press the forward/reverse
button while the tool it turned ON. Damage
to the tool will result.
VARIABLE-SPEED TRIGGER SWITCH
This impact driver is equipped with a
variable-speed ON/OFF trigger switch.
1. To start impact driver, gently squeeze
the trigger switch (2) (Fig. 8).
NOTE:
The impact driver will turn at its
slowest speed when the trigger switch is
depressed slightly. The impact driver will
turn at its fastest speed when the trigger
switch is fully depressed.
2. To stop the impact driver, release the
trigger switch.
NOTE:
Operating the tool at a slow speed
for an extended period of time may cause
the motor or the battery pack to overheat.
If either the tool or the battery gets hot,
stop using the impact driver and allow the
overheated components to cool for at least
15 minutes.
ASSEMBLY AND OPERATION
Fig. 7
Fig. 8