57
english
Problem
Solution
Oven light does not work
1. Make sure the cooker is connected to the mains.
2. The bulb has burned out or is not screwed all the way in.
– Unscrew glass bowl 1 from light socket 2 and tighten or replace the bulb 3 (bulb type:
E14 230V 25W, 300˚C heat resistance)
.
Cooking results are not what you expected
The cooking parameters available in the instruction manual should be treated
as
guidance
only
. In practice, these parameters depend on the weight and consi-
stency of dough, baking tray level, etc. Therefore, it is recommended to make a
few trial runs for your favourite foods and then write down the optimal times and
temperatures.
“0.00” pulses on the display
Voltage drop or temporary failure. Take the plug out of the electric soc
-
ket, wait for a while, then plug the appliance in again and set the current
time.
NOTE !
If after completing the above
steps the appliance is still ino-
perative contact your local se-
rvice centre.
When calling, please have your product model
and serial number available for reference.
This information is shown on the rating plate
located on the left side inside the appliance (vi-
sible after opening the oven door).
Please copy the following data from the ra-
ting plate:
Model...............................................................
Serial number .................................................
Summary of Contents for KGE 3415ZLX DYN
