NTP100 – Rev 1.0.1 Dec-04
20
© Masterclock
®
, Inc.
Set Device Name
To set the device name, select option ‘1’. Enter the desired device name. As with the WinDiscovery configuration utility,
you may enter a unique alphanumeric device name.
Set IP Configuration
To set the IP Configuration, select option ‘2’.
NOTE: If you select this option, you will be disconnected from the session
upon completion, whether you actually change any entries or not.
You have the choice of using DHCP for automatic IP
Configuration or entering the data in these screens. If you select DHCP, no other questions will be displayed, you will be
disconnected from the session, and you will not be able to Telnet to this NTP100 until you learn the DHCP-provided IP
address. To manually enter the IP information, enter ‘N’ for the DHCP (or Enter for the default), and enter the IP, Netmask,
Gateway, Primary DNS and Secondary DNS server.
