Generation II Entree Bath
–
All Models
INSTALLATION MANUAL
06-23-17
Page 10 of 11
2071 14
th
Ave – Columbus, NE 68601
800-798-5867 FAX: 402-563-9102
www.mastercarebath.com
Memo
1)Requires slots to be cut by the installer in the fiberglass rear sub floor of the tub to go around the plumbing pipe and
electrical conduit rough-ins.
2) For access to the front and back of the tub, recommended clearance distance from door side and back side of tub to
opposite wall is 36".
3) For Peninsula and Island configuration, Back Door Panel
will need to be ordered to cover opening at the back of the tub.
20"
15"
COLD
20"
HOT
1.625"
3"
ON BOARD GFCI
LOCATED UNDER
THIS PANEL
ON BOARD GFCI
LOCATED UNDER
THIS PANEL
3/4" HOT & COLD SERVICES AT THESE
LOCATIONS WITH 3/4" BALL VALVES FOR
A TOTAL OF 12" ABOVE THE FLOOR WITH
VALVE HANDLES LOCATED AS SHOWN
120V, 60 Hz, 20 Amp SERVICE
2x4 ELECTRICAL BOX WITH DUPLEX
RECEPTACLE FLUSH MOUNTED IN WALL
(GFCI ALREADY INSTALLED ON THE TUB)
3"
15"
COLD
20"
20"
HOT
2" PVC DRAIN
ROUGH-IN STUBBED
OUT 2" ABOVE FLOOR
2" PVC DRAIN ROUGH-IN STUBBED
OUT 2" ABOVE FLOOR
TUB CENTER LINE
31
1
/
4"
FOR STANDARD TUB
34
1
/
4"
FOR XL TUB
1.625"
3/4" HOT & COLD SERVICES AT
THESE LOCATIONS WITH 3/4" BALL
VALVES FOR A TOTAL OF 12"
ABOVE THE FLOOR WITH VALVE
HANDLES LOCATED AS SHOWN
CL
PENINSULA INSTALLATION
