STEP 25.
Position charcoal tray lifter (12) on side sup-
ports in grill body as shown. Place cooking
grates (4) into grill body.
GRILL IS READY FOR USE
STEP 26.
Insert grease clip (13) up through large
hole in bottom of grill body. Engage clip
end in small hole.
Position an empty metal container (not
included) on grease clip so it rests snugly.
The container is needed to collect grease
run-off.
Note:
Clip may require adjustment to fit
diameter of container.
13
4
12
STEP 3a.
Attach leg bracket (23) to right short
legs (19) as shown using phillips
head screws (B) and hex flange nuts
(D).
STEP 3b.
Fasten firebox box bracket (24) to leg
bracket (23) securing with phillips
head screws (A) and hex flange nuts
(D).
Do not fully tighten screws at this
time.
6
STEP 4.
Insert axle (22) through holes on
short right legs (19). Slide wheel (20)
onto axle and secure using cotter clip
(I). Snap axle cap (21) onto end of
wheel assembly as shown.
Repeat step on opposite side for
remaining wheel.
Do not fully tighten screws at this
time.
22
20
I
21
19
23
D
B
STEP 3a.
19
D
A
23
24
STEP 3b.
