Master POWERLAND BK8729, User Manual

Page: 21 / 41

EN
NOTE:
Most of the listed assembly hardware has been packaged separately, but some hardware
items have been preinstalled in the identified assembly parts. In these instances, simply
remove and reinstall the hardware as assembly is required.
Please reference the individual assembly steps and make note of all preinstalled hardware.
PREPARATION: Before assembling, make sure that you will have enough space
around the item; Use the present tooling for assembling. Before assembling please
check whether all needed parts are available.
It is strongly recommended this machine to be assembled by two or more people to
avoid possible injury.
ASSEMBLY INSTRUCTION
STEP 1
1. Attach the front Stabilizer (18) to the Main frame (1) with the Allen bolts (20) and Arc
washers (19)
2. Fix the rear Stabilizer (24) to the Main frame (1) with the Allen bolts (25) and Arc washers
(26) as shown.
STEP 2
1. Slip the Protective Guard (13) onto the Handlebar post (11);
2. Connect the lower Sensor wire (14) to the extension Sensor wire (12), and then install the
lower Tension control cable (38) to the upper Tension control cable (37) comes from the
Controller, ensured the Cable has been connected correctly. Fix the Handlebar post (11) on
the Main frame (1), using the Allen bolts (7), Spring washers (36), and Flat washers (15) as
shown. Slip down the Mast shield (13) and fit in the place.