Master MAS-F20white, User Manual

Page: 68 / 95

68
EN
button back on.If, after you have reset the treadmill, it is still not running correctly,
please run the self-checking analyse (please refer to Self-
Checking) to distinguish what type of error problem the machine is encountering.
5.1 Alarm signals
E0: Safety key not in the position
Put the safety key in the position.
E1: No feedback from controller or speed sensor
Check the condition of cables and ensure that all plugs are connected
between the motor controller and display.Check that the speed sensor and magnet
are in correct alignment and that there are no obstructions on the magnet. (The
magnet can be found on the
front roller near the motor belt).
If the running belt moves then displays the E1 error after 10 seconds, replace the
speed sensor.
If the running belt does not move, replace the controller
E3: Self-checking failure
1. If the running belt does not move, replace the controller.
2. Ensure that all plugs are connected between the motor controller and display.
3. Check that the speed sensor and magnet are in correct alignment and that there
are no obstructions on the magnet. (The magnet can be found on thefront roller near
the motor belt)
No Power
1. Check fuses (They are located on the controller under the motor cover )