Master Power GreenE 3.68K, Installation, Operation & Maintenance Manual

Page: 32 / 46

62
VRT_ENABLE
POW SI RATE
4.3.5 485 Address
4.3.6 485 Baud rate
4.3.7 Language
Enable or disable the High/Low voltage ride through
capability.
Interface Description
-VRT_ENABLE-
1: DISABLE
2: ENABLE
The input value of power rising rate.
Default value is 250%.
Interface Description
-POW SI RATE-
INPUT:
250%
Press UP/DOWN button to adjust the input figure.
Press ENTER button to confirm or ESC button to cancel the
input and return to setup interface.
The input value should range between 1 and 32.
Interface Description
-485 ADRESS-
INPUT:
1
Value range
(1 ~ 32)
Press UP/DOWN button to move corresponding options.
Press ENTER button to confirm or ESC button to cancel the
selection and return to setup interface.
There are three alternative options: 2400/4800/9600.
Interface Description
-SELECT-
1: 2400
bps
2: 4800
bps
3: 9600
bps
Press UP/DOWN button to move corresponding options.
Press ENTER button to confirm or ESC button to cancel the
selection and return to setup interface.
Interface Description
-LANGUAGE-
1: CHINESE
2: ENGLISH
3: Italia
User Manual
63
4.3.8 LCD backlight
4.3.9 Date/time
4.3.10 Clear history
4.3.11 Password Setting
Press UP/DOWN button to adjust the input figure.
.Press ENTER button to confirm or ESC button to cancel
the input and return to setup interface.
.The input value should range between 20 and 120.
Interface Description
-LIGHT TIME-
INPUT:
20
UNIT: S (secons)
Value range
(20 ~ 120)
Press UP/DOWN button to adjust the input figure.
Press Enter button to move cursor backward, confirm input
and return to setup interface.
Press ESC button to move cursor forward and return to
setup interface.
The input value should range between 2000 and 2099.
Interface Description
-DATE/TIME-
DATE:
2020-07-19
TIME: 10:01:12
WEEK: Monday
Clear all the previous history in Inquiry/Record menu.
Press UP/DOWN button to move corresponding options.
Press ENTER button to confirm or ESC button to cancel the
selection and return to setup interface.
Interface Description
-DEL REC-
1: CANCEL
2: CONFIRM
This interface will be used to change password for entry
into the setup interface.
Press UP/DOWN to adjust the input figure.
Press Enter to move cursor backward, confirm input and
return to setup interface.
Press ESC to move cursor forward and return to setup
interface.
Interface Description
-PASSWORD-
OLD:
XXXXX
EW: XXXXX
CONFIRM: XXXXX
User Manual