22
LOCK-OUT SWITCH
The lock-out switch (1) is a safety device
designed to reduce the possibility of
accidentally starting the saw (Fig. 11). This
switch must be depressed before the
trigger switch (2) can be depressed.
TRIGGER SWITCH
1. To turn the saw ON, press the lock-
out switch with your thumb.
NOTE:
The lock-out switch can be pressed
from either side of the handle.
For safety reasons, the operator
must read the sections of this
Owner’s Manual entitled “GENERAL
SAFETY WARNINGS”, “POWER
TOOL SAFETY”, “SPECIFIC SAFETY
RULES”, “BATTERY AND CHARGER
SAFETY” and “SYMBOLS” before
using this cordless circular saw.
Verify the following every time the
cordless circular saw is used:
1. The blade is tight and sharp.
2. All adjustments are tight.
3. The workpiece is properly
secured.
4. Safety glasses are being worn.
Failure to observe these safety rules
will significantly increase the risk of
injury.
WARNING
!
ASSEMBLY AND OPERATING
Fig. 11
Summary of Contents for 134455
Page 16: ...16 CONTENTS...
Page 27: ...27 EXPLODED VIEW...
