24
GENERAL CUTTING
1. Make any adjustments to the saw
before installing the battery.
Adjustments include cutting depth,
cutting angle and rip guide (if
installed).
2. Clearly mark the workpiece to locate
the position of the cut.
3. Hold a smaller workpiece with a vise.
Clamp a larger workpiece to a
workbench or table.
DANGER:
Any workpiece that is
not adequately clamped in place may
come loose and cause serious injury.
Never hold the workpiece in your hand.
4. Make sure there are no nails, screws,
clamps or foreign materials in the path
of the saw blade.
5. With both hands firmly gripping the
saw, and with the blade NOT in
contact with the surface to be cut,
start the saw by pressing the lock-off
button and then the trigger switch.
6. Once the saw has reached full speed,
place the front edge of the sole plate
on the workpiece and gradually bring
the moving blade into contact with the
workpiece at the appropriate location.
ASSEMBLY AND OPERATING
!
Summary of Contents for 134455
Page 16: ...16 CONTENTS...
Page 27: ...27 EXPLODED VIEW...
