16
Problem
Possible Cause
Corrective Action
The connection between the regulator
and LP tank are not in good condition.
The LP tank valve and regulator
control valve are not open.
The LP tank is empty.
The burner does
not light up.
Troubleshooting
Check and make sure the regulator coupling nut is tightened to
the LP tank valve.
The regulator control valve and LP tank valve is open during normal
operation. The regulator control valve is opened in clockwise
direction and the LP tank valve is opened in counter-clockwise direction.
Check and make sure the LP tank is filled with fuel.
The burner does
not stay lit.
High wind condition.
If wind blows out flame, gas supply will be cut off. Move out of wind
and restart.
The oil is not
reaching desired
temperature.
The food is not fully defrosted.
The regulator control valve is not
fully opened.
Overfilled Protection Device (OPD) on
tank has been tripped.
Do not attempt to fry frozen or partially frozen food.
Ensure the food is completely thawed prior to proceeding.
Fully open the regulator control valve. The regulator control valve is
opened in clockwise direction and the LP tank valve is opened in
counter-clockwise direction.
Overfilled Protection Device (OPD) has been activated. To reset, turn off
regulator control valve and LP tank valve. Disconnect the regulator from
the LP tank and wait one minute. Reconnect the regulator control valve
to the LP tank valve and slowly open the LP tank valve until it is fully open.
Product no. 085-3226-4 (TF2244806-MC-00) |
Contact us: 1-855-803-9313