7
TM
Using y
our F
ood Chopper
Before using your chopper, ensure that the unit is assembled correctly.
1.
Place the base of the unit on a flat, clean, dry counter or tabletop. Plug the unit into a
working 120 volt 60Hz AC outlet. Arrange cord so it does not drape over countertop or
tabletop where it can be pulled on by children or tripped over accidentally.
2.
Your chopper has been designed to process 175 mL (¾ cup) of dry food at a time. If you need
to process more than this, simply do several batches. It is recommended that most foods be
cut into small pieces (1.5 cm / 1/2 in). Place the food in the bowl. Place the lid on the bowl
and lock in place.
3.
Press the "Pulse" button and hold down for several seconds. Release the "Pulse" button and
the motor will stop. You will be able to examine the food's consistency through the transparent
bowl. If more processing is required, simply press the "Pulse" button for a few more seconds.
Be careful not to over process, as most foods will only require several seconds.
4.
If your chopper does not operate, refer to the section on “Assembling your Food Chopper”.
Check that the locking tabs on the bowl and the extended tab on the lid are properly
assembled.
5.
Once the food has reached the desired consistency, release the "Pulse" button and the
blade will stop rotating.
6.
Once the chopping blades have come to a complete stop, unplug the unit and remove the lid.
Carefully remove the blade from the bowl by handling it by the central hub. Remove the bowl
from the base and empty the contents. A spatula may be used if necessary.
WARNING: Blades are sharp – handle with care.
This appliance is designed for “Pulse operation”.
Do not operate motor continuously for longer than one minute.
Allow to rest for 3 minutes before using again.
043-5726-2_MC-71401_MasterChef_Food Chopper_ENG_BW.indd 7
2018-04-20 2:13 PM
