10
Taktgeber 2 nur für Zahnrad- oder
Zweikraftloks.
•
Hinweis zu Poti:
Bei Bedarf kann
hier eine externe Potentiometerpla-
tine Art.Nr.: 8242010 angeschlos-
sen werden.
•
Hinweis zur Bus-Buchse:
Der
Busanschluss ist vorgesehen zur
Steuerung weiterer Komponen-
ten. Für den Anschluss an die
Funktionsausgänge empfehlen
wir die verschiedenen MiniCT An-
schlusskabel (8312001, 8312002,
8312003). Die Belegung können
Sie Abbildung 1 entnehmen.
3.2 Betriebsartenschalter
Mit dem Betriebsartenschalter
wird die Betriebsart gewählt:
•
0 = Alles aus
•
1 = Licht, Fu Sound
•
2 = Fahrbetrieb inkl. Sound
•
3 = wie 2
3.3 Anschlüsse auf der Unterseite
Auf der Unterseite finden Sie
noch den Anschluss A4. Dieser
hat nur eine Belastbarkeit von
0,1 A. DEC+ finden Sie auf der
Oberseite am Puffer Anschluss.
3.4 Zusätzliche Anschlüsse
Je nach Lok bleiben freie
Anschlüsse übrig, welche Sie
Clock 2 is designed for cog wheel
of dual engine locomotives.
•
Poti:
The Poti connector connects
an external potentiometer for
manual volume control (item #
8242010).
•
Bus Connector:
The Bus Con-
nector is provided to control ad-
ditional components. We suggest
to use the micro decoder cables
(8312001, 8312002, 8312003) to
connect the components to the
decoder. The connector assign-
ment is illustrated in fig. #1.
3.2 Operation Mode Switch
Use the operation mode switch
to select the operation mode:
•
0 = all functions off
•
1 = Light, Fu Sound
•
2 = Driving operation incl. Sound
•
3 = corresponds to 2
3.3 Connectors on the bottom side
On the lower side you can
find the connector A4. This
output has a load capacity of
0.1 amps. The common DEC+
is located on the top side.
3.4 Additional Connections
Depending on the requirements of
the locomotives, several connec-