![background image](http://html.mh-extra.com/html/massoth/dimax-100a/dimax-100a_manual_1735954005.webp)
2.4.CV Progr Decoder Read-Outs
An AC or DC power supply is required for programming and reading MASSOTH eMOTION Digital Decoders.
Note the specifications in chapter 4. Connect the track terminals of the decoder to the right hand terminal of the
PC-Module. An electrical load (preferably a motor) must be connected to the decoder to receive a programming
confirmation (see Illustration 3).
The PC-Module supports the programming method “reading and writing bit-by-bit“.
For programming the software “Massoth CV-Programmer“ or “Massoth CV-Programmer Easy“ is required. The
Massoth CV-Programmer features a brief help file. The “Easy“ Program is self-explanatory.
3. Self-Update
You may update the
PC-Module as well. An AC or DC power supply is required. Note the specifications in
chapter 4.
Start the „DimaxUpdate V11“ program and follow the instructions on the screen.
DiMAX 100A PC Module
– 8175001 4
Illustration 3: Updating eMOTION Decoders