![background image](http://html.mh-extra.com/html/massoth/dimax-100a/dimax-100a_manual_1735954003.webp)
1.3.
Scope of Supply
•
PC-Modul
•
Serial Cable RS232
•
DiMAX Bus Cable
•
Service CD
•
Manual
2.
Hook-Up and Operational Modes
Please connect only the component to the PC-module which is to be programmed or
updated. Disconnect all
other components from the programming track.
Please find the software and update files required on the CD supplied. The current versions of the update files
and the software are available on our web site:
http://www.massoth.com
Support – Software.
During operation the red LED is flashing.
2.1.DiMAX Bus Components
An AC or DC power supply is required for updating all DiMAX bus components. Note the specifications in
chapter 4.
During this procedure the PC-Module acts as a central station and supplies the component which is to be
updated with power via the bus cable.
The DiMAX Navigator needs to be set into the update mode manually: keep the right hand STOP-key
depressed as you plug in the bus cable.
The DimaxUpdate V11 program is required for updating DiMAX bus components. Follow the instructions on the
screen. Please check our web site
http://www.massoth.com
for the current version of the update software.
DiMAX 100A PC Module
– 8175001 2
Illustration 1: Updating DiMAX Bus Components