3. Wait for 3 minutes to let the fan
continues working;
4. Turn the main switch/key to “OFF”.
If turn off the main switch to stop the
engine directly, the coolant will boil to spill
out because of the engine’s heat.
Drive Select Lever Operation and
Reverse Driving
Before shifting, you must stop the ATV and
return the throttle lever to the closed
position; otherwise the transmission may
be damaged.
Shifting:
Neutral to High and High to Low
1. Bring the ATV to a complete stop and
return the throttle lever to the closed
position.
2. Once the engine speed is below
1400rpm, apply the brakes, and then shift
by moving the drive select lever along the
shift guide.
3. Open the throttle lever gradually.
NOTE:
Make sure that the drive select lever is
completely shifted into position.
6-3
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
