As you approach a curve, slow down and
begin to turn the handlebars in the desired
direction. As you do so, put your weight on
the footboard to the outside of the turn
(opposite your desired direction) and lean
your upper body into the turn. Use the throttle
to maintain an even speed through the turn.
This maneuver will let the wheel on the inside
of the turn slip slightly, allowing the ATV to
make the turn properly.
This procedure should be practiced at slow
speed many times in a large off-road area
with no obstacles. If an incorrect technique is
used, your ATV may continue to go straight.
If the ATV doesn’t turn, come to a stop and
then practice the procedure again. If the
riding surface is slippery or loose, it may help
to position more of your weight over the front
wheels by moving forward on the seat.
Once you have learned this technique you
should be able to perform it at higher speeds
or in tighter curves.
Improper riding procedures such as abrupt
throttle changes, excessive braking, incorrect
body movements, or too much speed for the
sharpness of the turn may cause the ATV to
tip.
If the ATV begins to tip over to the outside
7-16
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
