6-11
10-25 hours:
Avoid prolonged operation above 3/4
throttle. Rev the machine freely but do not
use full throttle at any time.
After break-in:
Avoid prolonged full throttle operation. Vary
speeds occasionally.
Braking system break-in
The break-in of the braking system is
completed by applying 50 times of braking
with proper operating force. Each braking
should be implemented in every three
minutes or each 1km’s running.
The braking system can perform in best
way after the break-in.
Prompt braking before break-in may do
harm to the brake pads.
Break-in is needed when replace new
brake pads or the brake disc.
Modifications
Improper installation of accessories or
modification of this vehicle may cause
changes in handling which in some
situations could lead to an accident.
If you plan to modify the vehicle or drive
the ATV with modifications, please
remember followed
:
●
Never modify this ATV through improper
installation or use of accessories. All
parts and accessories added to this
vehicle should be genuine or equivalent
components designed for use on this
ATV and should be installed and used
according to instructions. If you have
questions, consult an authorized ATV
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO