output power and the torque could be
adjusted by changing the injection quantity.
Water Temperature Sensor
This sensor is used to cool the water
temperature. According to the temperature,
ECU can automatically adjust the injection
quantity to assure the stability of the engine.
Ignition signal
The signal generated by generator would
provide ECU the proper ignition timing signal.
As the center of the EFI system, this model
adopts the special design of microcomputer
chip as controller, which could control the
injection quantity, by calculating the
information gathered by the sensors. This
could enable the engine to perform in a
conservation and less emission way.
EFI system examination
If the EFI system breaks down, the relevant
fault code would be shown in the
speedometer, or you can examine the
system through EFI fault detector
(purchasing from your dealer). This detector
could provide the detailed fault information.
An additional owner’s manual for the
detector is available.
1. Diagnostic apparatus 2. EFI cables
Engine oil and oil filter
The engine oil level should be checked
before each ride. In addition, the oil and the
oil filter must be changed and replaced at the
8-8
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
