Advanced Field and
Headland Management
Systems
22
Dual Control menu
The Dual Control menu enables
fully programmed command of
front and rear Dual Control and
Trailed Implement Control, so
maximum output and work quality
can be achieved with a minimum
of operator input.
When using semi-mounted
ploughs, Dual Control automates
furrow entry and exit, aids setting
the plough, improves evenness
and control of work and gives the
full benefit of wheelslip control.
When front linkage is fitted, front
Dual Control gives automated
depth and entry and exit points
with front and rear linkage-
mounted equipment.
Trailed Implement Control (TIC)
TIC uses wheelslip data to
automatically regulate working
depth to optimise productivity
when using trailed equipment. It is
operated via the standard armrest-
mounted ELC controls with set-up
and monitoring via either ITCS or
Datatronic 3.
For comprehensive information about
Massey Ferguson advanced Field
and Headland Management systems,
please ask your Dealer for the
‘MF Technology’ brochure.
Programmed headland and
implement control with
Datatronic 3
Datatronic 3 is controlled from a
main screen with up to seven main
application menus, plus ‘Settings’
for console set-up.
Work menu
The Work screen displays engine
and PTO speed, travel speed and
wheel slip information. A wide
range of tractor functions can
also be displayed and controlled,
including spool valves, memory,
Dual Control and TIC.
Headland menu
The Headland menu, quite
simply, gives access to the
most comprehensive headland
management system
available today.
It enables straightforward
programming of up to 35
operations, activated at the touch
of an armrest-mounted button. The
sequence can be modified or over-
ridden at any time.
Memories menu
Six independent sets of
information can be stored, named
and displayed. The data can also
be transferred, via SD memory
card, to the office computer for
analysis or from tractor to tractor
to speed implement setup .
Recorded information includes:
• tractor settings, including
gearbox, spool valves or a
recorded headland sequence;
• implement width
• information gathered during field
operation, including hours and
area worked, fuel usage, distance
covered... and more.
Electro-hydraulic spool
valves menu
The EHS Valves menu is used to
set the operating characteristics of
up to four electro-hydraulic spool
valves. You can enable or disable
‘float’ and accurately set ram
extension and retraction, flow rates
and kickout timing.
ISOBUS compatibility
ISOBUS, the industry-standard for
implement connectivity, means that
all of your equipment can be easily
set up and operated via the GTA
Console.
Remote camera
The optional remote video camera
can be fitted anywhere on the
tractor or on any front- or rear-
mounted implement.
Used in conjunction with clear on-
screen view (actual image shown)
on the GTA Console when reversing
enables faster, safer haulage work
or, the operator to view any rear or
side-mounted equipment.
